Instructions for use

Before first use

The Restander can withstand moderate wind loads. Loads and usage patterns can be very different, but for long use of the Restander and even more so the umbrella, keep the following in mind:

  1. Close the sun umbrella when it is not needed.
  2. Close the sun umbrella when it is not pleasant to sit under it due to the wind. In case of strong wind, wind gusts, or heavy rainfall, damage to the sun umbrella and Restander may occur.

Before setting up the shade, check that the Restander is undamaged and that all components are present.

Installation of holder

  1. Pull the holder out of the anchor with the help of a screwdriver.
  2. Turn the holder over.
  3. Remove the ring from the anchor.
  4. Insert the holder into the anchor and rotate it by 45°.
  5. Put the ring over the holder and insert it in the anchor.
  6. Screw the screws with plastic heads into the holder, insert the sun umbrella and fasten it.
  7. The Restander is set.

Storing the holder

  1. Unscrew the screws with plastic heads and remove the sun umbrella.
  2. Remove the ring from the anchor with the help of a screwdriver and remove it over the holder.
  3. Rotate the holder by 45° and pull it out of the anchor.
  4. Turn the holder over.
  5. Insert the ring into the anchor.
  6. Insert the holder into the anchor.
  7. The Restander is stored.
Restander s.p. Phone: +386 31 00 30 90
Terms and conditionsContact
2024 © All rights reserved